PART |
Description |
Maker |
MICROFOX-E-ESD |
Ergonomically designed two-component handles for fatigue-proof and non-slip use
|
PHOENIX CONTACT
|
CRIMPFOX-25R |
Ergonomically designed handles ensure an optimum grip and reduce the amount of force required by 25%
|
PHOENIX CONTACT
|
CRIMPFOX-50R |
Ergonomically designed handles ensure an optimum grip and reduce the amount of force required by 25%
|
PHOENIX CONTACT
|
UNIFOX-PC-VDE-DB |
The tools feature ergonomic two-component safety handles
|
PHOENIX CONTACT
|
IR1150 IR1150PBF IR1150ISTRPBF |
One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Consumer market One Cycle Control PFC IC designed to operate in continuous conduction mode (CCM), designed and qualified for the Industrial market.
|
International Rectifier
|
TC1037 TC1037CECT TC1039 TC1038 TC1039CECH TC1038C |
The TC1037/1038/1039 are single, low-power comparators designed for low-power applications. These comparators are specifically designed for operation from a single supply. However, operation from dual supplies also is possible, and power s Linear Building Block . Single Comparator in SOT Packages
|
MICROCHIP[Microchip Technology] Microchip Technology Inc.
|
H66T19AA H66T19BA H66T32BA H66T68AA H66T68 H66T68B |
64-Note ROM memory Dynamic speaker can be driven with external NPN transistor CMOS LSI DESIGNED FOR USE IN DOOR BELL/ TELEPHONE AND TOY CMOS LSI DESIGNED FOR USE IN DOOR BELL, TELEPHONE AND TOY
|
MICRO-ELECTRONICS[Micro Electronics] HSMC Hi-Sincerity Mocroelectronics Hi-Sincerity Microelectronics
|
MCP809 MCP809T-270I_TT MCP809T-300I_TT MCP809T-315 |
1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO3 The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper ... The MCP810 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d The MCP809 is a voltage supervisory device designed to keep a microcontroller in reset until the system voltage has reached the proper level and stabilized. It also operates as protection from brown-out conditions when the supply voltage d MICROCONTROLLER SUPERVISORY CIRCUIT WITH PUSH-PULL OUTPUT
|
Microchip Technology Inc.
|
GSM31P256KB-I66 GSM31P512KB-I66 |
x64 Interleaved Burst Mode SRAM Module 256KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统56KB二级高速缓冲存储器) 512KB Secondary Cache Module Designed For Use With Intel Pen-tium CPU based system(用于英特尔奔腾处理器系统12KB二级高速缓冲存储器)
|
GSI Technology
|
AT75C140 |
AT75C140 Advance Information [Updated . 18 Pages] This Smart Internet Appliance Processor is a high-performance processor specially designed Smart Internet Appliance Processor (SIAP-TM) This Smart Internet Appliance Processor is a high-performance processor specially designed for network-enabling consumer and industrial applications. The specific architecture of this device delivers unmatched performance for low power con
|
ATMEL[ATMEL Corporation]
|
PBP-3201 PBP-3201-22 PBP-3202-22 PBP-3203-22 PBP-3 |
Equipment Designed to Conform EMI Regulations Such As VCCICISPRFCCVDEetc EQUIPMENT DESIGNED TO CONFORM EMI REGULATIONS SUCH AS VCCI,CISPR,FCC,VDE,ETC Equipment Designed to Conform EMI Regulations Such As VCCI/CISPR/FCC/VDE/etc KPT 10C 10#20 PIN PLUG KPTC 10C 10#20 SKT PLUG KPTC 6C 6#20 SKT PLUG KPTC 8C 8#20 PIN PLUG
|
http:// LAMBDA[DENSEI-LAMBDA]
|